Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 996)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
980 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
[New]
Opens the dialog window External measured value # in which the
parameters for the external measured value can be entered (see Chapter
5.6.3.11.2, page 880).
[Properties]
Opens the dialog window External measured value # in which the
parameters for the external measured value can be edited (see Chapter
5.6.3.11.2, page 880).
[Delete]
Deletes the external measured value selected in the table.
5.6.4.12 MEAS Ref
5.6.4.12.1 MEAS Ref - Overview
Dialog window: Method ▶ MEAS Ref ▶ Properties... ▶ MEAS Ref - 'Command name'
Command for the Measurement of a reference spectrum.
Devices
This command can be executed with the following device:
Spectrometer: Avantes
Appearance
The command has the following appearance:
Parameters
The parameters for the command MEAS Ref are configured on the follow-
ing 2 tabs:
￭ General/Hardware
Parameters for device.
￭ Measuring parameters
Parameters for setting the measurement procedure.
Command variables
The following command variables are generated in the method run by the
command MEAS Ref and can be used in formulas under the designation
'Command name.Variable designation':