Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 994)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
978 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Measurement frequency
712
Selection
auto | 300 Hz | 2.4 kHz
Default value auto
auto
The more suitable of the two frequencies is selected.
Stop time
Maximum period of time for measurement.
Range 0 ... 999999 s
Default value 3000 s
Measuring interval
Time interval for entering a measuring point in the measuring point list.
712
Range
0.4 ... 999999 s
Default value 2.0 s
856
Range
0.1 ... 999999 s
Default value 2.0 s
Sample solution
Selection of the sample solution from the table Sample solutions (TC
conductivity).
Selection DIN | Table entries
Default value DIN
Start temperatur
Temperature at the time of the start of the measurement.
Range -20.0 ... 150.0 °C
Default value 20.0 °C
Stop temperature
Temperature at the time of the end of the measurement.
856
Range
-20.0 ... 150.0 °C
Default value 40.0 °C