Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 118)

3.3 Sample tables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
102 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Note
If a value is entered or imported into this field, then in addition the time
of the data entry and the data source are stored manually, while the
'Name of the scale', the 'Name of the barcode reader' or the
'Name of the import file') are stored automatically at the same time,
placed in the determination and identified in the Information sub-
window as Data entry and Data source.
Note
If a negative value is entered in this field (e. g. during data import from a
scale in the event of reweighing), then this will be also be calculated as a
negative in the formula editor.
Input Number with a maximum of 10 digits
Default value 1.0
Unit
Sample size unit (initial weight). There are no restrictions on the text to be
entered in this field.
Input 16 characters
Selection g | mg | µg | mL | µL | pieces
Default value g
Navigation
Display of the currently selected line in the sample table with the following
functions:
Jump to the first line in the sample table.
Jump to the previous line in the sample table.
Option of entering the desired line number to which the program jumps
when the [Enter] is actuated.