Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 272)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
256 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
–<DeterminationReport> Determination report
<xmlCreator val=""/> Program name
<xmlCreatorVersion val=""/> Program version
<xmlCreatorBuildNo val=""/> Build number
<subtype val=""/>
+ <Determination> Determination data
+ <Method> Method data
+ <Sample> Sample data
+ <Results dynamic=""> Results overview
+ <ResultaSingle=""> Single results
+ <Command Data dynamic=""> Command variables
+ <Comvars dynamic=""> Common variables
+ <usedDevices dynamic=""> Device data
+ <usedSensors dynamic=""> Sensor data
+ <TcSampleSolutions
dynamic=""> Sample solutions (TC conductivity)
+ <Method params dynamic=""> Method parameters
+ <Statistics> Statistical data
–<System> System data
<userName val="" /> User name (abbreviation)
<userNameFull val="" /> User name (full name)
<clientName val="" /> Client name
<progVersion val="" /> Program version - Build number
<licenseRoot val="" /> License code
</Sytem>
</DeterminationReport>
Note
dynamic= means that the following nodes can appear more than once.
The actual data is situated between " ".