Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 963)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 947
[New]
Opens the dialog window External measured value # in which the
parameters for the external measured value can be entered (see Chapter
5.6.3.11.2, page 880).
[Properties]
Opens the dialog window External measured value # in which the
parameters for the external measured value can be edited (see Chapter
5.6.3.11.2, page 880).
[Delete]
Deletes the external measured value selected in the table.
5.6.4.7.6 MEAS T - Fix endpoint evaluation
Dialog window: Method ▶ MEAS pH ▶ Properties... ▶ Additional evaluations ▶ Fix
endpoint evaluation #
Quantity
Selection of the fixed measured quantity to which the associated values for
the other quantities are to be interpolated from the list of measured points.
Selection Measured value | Time
Default value Measured value
Fix value
Value of the fix endpoint.
Measured value
Range
-20.0 ... 150.0 °C
Time
Range
0.0 ... 999999.9 s
5.6.4.8 MEAS T/Flow
5.6.4.8.1 MEAS T/Flow - Overview
Dialog window: Method ▶ MEAS T/Flow ▶ Properties... ▶ MEAS T/Flow - 'Command
name'
Command for Temperature and gas flow measurements.
Devices
This command can be executed with the following devices:
Sample Processor: 774, 874
Appearance
The command has the following appearance: