Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 384)

4.8 Subwindow curves ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
368 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
For DET commands
Selection
Volume [mL] | Measured value | ERC | Time [s] |
Temperature [°C] | Calculated 1...3 | External
1...3
Default value Measured value
For MET commands
Selection
Volume [mL] | Measured value | dMW | Time
[s] | Temperature [°C] | Calculated 1...3 | Exter-
nal 1...3
Default value Measured value
For SET, STAT, DOS and KFT commands
Selection
Time [s] | Measured value | Volume [mL] | dV/dt
[µL/min] | Temperature [°C] | Calculated 1...3 |
External 1...3
Default value Volume [mL]
For KFC commands
Selection
Time [s] | Measured value | Amount [µg] |
Charge [mAs] | Drift [µg/min] | dV/dt [µ/min] |
Ugen | Igen [mA] | Calculated 1...3 | External
1...3
Default value Amount [µg]
For BRC commands
Selection
Time [s] | Measured value | Amount [µg] |
Charge [mAs] | Drift [µg/min] | dV/dt [µ/min] |
Ugen | Igen [mA] | Calculated 1...3 | External
1...3
Default value Amount [µg]
Für TET-Befehle
Selection
Volume [mL] | Measured value [°C] | dT/dV [°C/
mL] | ERC | Time [s] | Calculated 1...3 | External
1...3
Default value Measured value [°C]
For MEAS commands
Selection
Time [s] | Measured value | dMW/dt | Tempera-
ture [°C] | Calculated 1...3 | External 1...3
Default value Measured value