Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1592)

9.3 Determinations ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1576 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
The selected determinations are recalculated. The results of this recal-
culation are entered automatically in the subwindow Result display.
Note
If a variable is modified, then with [Recalculate] all the selected
determinations will be recalculated with the new value. If one vari-
able is not modified then when several determinations are recalcu-
lated the original value of the variable will be used (i.e. variables with
the same name but different values will not be overwritten until they
are deliberately altered).
7 In the dialog window Reprocessing click on [OK].
Each determination that has been modified by reprocessing will be
saved as a new version with a version number increased by +1 and the
dialog window Reprocessing will be closed. This button is inactive for
as long as the recalculation has not yet been triggered and if not all the
selected determinations could be reprocessed.
Modify method
Note
The method can only be modified if the method is identical for all the
determinations that have been selected.
1 Change to the Method tab.
2 Click on [Modify method].
The dialog window Method editor opens.
3 Modify method as desired.
Here it is possible to modify parameters from existing commands as
well as to insert and delete tracks and commands.
4 Click on [OK].
5 Click on [Recalculate].