Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 356)

4.6 Subwindow Information ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
340 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Note
If for the sample data variables ID1 … ID16, Sample size, Sample size
unit, Sample position a different name is defined from that given in
the method variables in the START command then the title shown here
will consist of this name with the standard name shown in brackets (e.g.
Batch (ID2)).
Live modification
Information on the last live modification of sample data.
Modification reason sample data:
Reason for the sample data modification.
Modification comment sample data:
User comment on modification of sample data.
4.6.5 Information - Configuration
Tab: Database ▶ Information ▶ Configuration
Shows general information about the devices, sensors and common varia-
bles used.
Device 'Device name'
Information about the device used (only the existing device information will
be shown).
Device type:
Type of device.
Program version:
Device program version.
Device serial number:
Serial number of the instrument.
Rack name:
Name of the rack on the sample changer.
Rack code:
Rack code of the rack on the sample changer.