Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 320)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
304 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Functions
If determinations have been edited in the subwindow Modifications then
the following functions can be triggered:
[Recalc]
Recalculate selected determination(s) with the modifications on variables,
method, statistics or curve evaluation made in the subwindow Modifica-
tions.
During the recalculating a progress bar appears; the recalculating can be
interrupted thereby by means of the next to the bar. The results of this
recalculation are entered automatically in the subwindow Result view.
This button is inactive until modifications have actually been made. After the
recalculation further data can be modified and then recalculation triggered
again.
[Reset]
Reset all modifications made and unsaved during reprocessing to the original
data and results.
This button is inactive for as long as no modifications have been made or
when the recalculation has not yet been triggered.
[OK]
Close the dialog window Reprocessing. Each determination that has been
modified by reprocessing will be saved as a new version with a version num-
ber increased by +1.
This button is inactive when the recalculation has not yet been triggered and
if not all the selected determinations could have been recalculated.
[Cancel] or
Close the dialog window Reprocessing. The result of the reprocessing
made since the last saving will not be saved.
Note
If the option Comment on modification of determinations is ena-
bled under Configuration
▶ Tools ▶ Security settings ▶ Audit Trail/
Modifications, the dialog window Modification comment determi-
nation is displayed before saving.