Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1352)

6.8 Subwindow Common variables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1336 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
6.8.3.2 Properties - Common variable
Tab: Configuration ▶ Common variables ▶ [Edit] ▶ Properties... ▶ Common variable
- 'Name' ▶ Common variable
Name
Name of common variable.
Input 50 characters
Type
Selection of the type for a new common variable. For existing common var-
iables the type will only be shown; it cannot be edited.
Selection Number | Text | Date/Time
Default value Number
Value
Value of common variables. This value can be assigned in a method by a
CALC command or entered manually. For methods that use the common
variable it is available as the variable 'CV.Name.VAL' or 'CV.Name' (short
form) for calculations.
For type Date/Time variables, the date can be selected by pressing in
the dialog window Select date.
Type = Number
Range
-1E+99 ... 1E+99 (max. 15 places)
Type = Text
Input
256 characters
Type = Date/Time
Selection
Date selection
Value (unit)
Designation of the unit. If a value is assigned automatically then the unit will
be automatically entered here. It is available for methods that use the com-
mon variable as variable 'CV.Name.UNI' for calculations.
Input 20 characters
Selection 'empty' | mol/L | mmol/L | µmol/mL | g/L | mg/L
| µg/L | mg/mL | ppm | % | mEq/L | mL | µg
Default value mol/L
Comment
It is possible to enter remarks about the common variable.