Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1554)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1538 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Port type ACTIVE INACTIVE ERROR
Stirrer
Stirrer on Stirrer off Display flashes.
Valve
Valve open Valve closed Display flashes.
8.4.6.4 Analog inputs
Program part: Manual Control
8.4.6.4.1 Analog inputs - Overview
Program part: Manual Control
If in the device tree the branch Analog inputs is selected, then the adjacent
value for all connected analog inputs in their physical order is shown in the
subwindow for the graphical display.
Graphical display
Example:
8.4.6.4.2 Analog input
Program part: Manual Control
If in the device tree a single analog input is selected, then the properties of
the input are displayed in the subwindow for functions/parameters.
In the subwindow for the graphical display, the adjacent value of the input
is displayed.