Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 888)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
872 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Moves the selected line up (changes the sequence).
Moves the selected line down (changes the sequence).
[New]
Opens the dialog window Fix endpoint evaluation # to enter a new fixed
endpoint (see Chapter 5.6.3.9.10, page 874).
[Properties]
Opens the dialog window Fixed endpoint evaluation # to edit the fixed
endpoint selected in the table (see Chapter 5.6.3.9.10, page 874).
[Delete]
Deletes the selected line.
Minimum evaluation
on | off (Default value: off)
If this option is enabled, then the associated volume for the minimum meas-
ured value will be interpolated from the measuring point list.
Threshold value
The evaluation of the minimum begins as soon as the slope of the curve
exceeds the set threshold value.
Can only be edited for Minimum evaluation = on, otherwise disabled.
Range 0.1 ... 20.0 °C/mL
Default value 1.0 °C/mL
Maximum evaluation
on | off (Default value: off)
If this option is enabled, then the associated volume for the maximum
measured value will be interpolated from the measuring point list.
Threshold value
The evaluation of the maximum begins as soon as the slope of the curve
exceeds the set threshold value.
Can only be edited for Maximum evaluation = on, otherwise disabled.
Range 0.1 ... 20.0 °C/mL
Default value 1.0 °C/mL