Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 249)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 233
Width
Shows the predefined width of the fixed report.
Height
Height of fixed report.
Range 0.0000 ... (max. page height) mm
Fixed report
Selection of a predefined fixed report.
Selection Calculations | Calibration data | Curves | List of
meas. points | Messages | Method parameters |
Monitoring report | Raw data (endpoints) |
Result list | Signature list Determination | Sig-
nature list Method | Standard addition | Statis-
tics data (full) | Statistics data (brief) | Titration
and measuring parameters | Common variables
used | Devices used | Global variables used |
Sample solution used (TC conductivity) | Sen-
sors used | Solutions used | Variables
Default value Calculations
Command name
Name of the command for which a measuring point list is to be produced.
With not defined, the lists for all curves present in the determination will
be produced as default.
This parameter appears only when Fixed report = Measuring point list.
Input 50 characters
Selection not defined
Default value not defined
4.4.1.4.3.8 Report template - Group field
Program window: Database ▶ Report template
A group field is for the purpose of grouping together a variety of fields in
the report template. All of the fields gathered together in a group field can
be moved together as a group. The group field prevents a page break inside
the group field.
The group field always extends across the entire width of a page; only the
upper edge (Y value) and the height of the field can be configured.