Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 189)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 173
3.8.3 Live display - Application note
Subwindow: Workplace ▶ Live display
On the tab Application note the application note of the method loaded
and which is defined in the START command is displayed. This tab is opened
by default in the subwindow Live display when loading the method.
3.8.4 Live display - Messages
Subwindow: Workplace ▶ Live display
On the tab Messages there is a scrollable message field which contains all
messages concerning events occuring during the run of the current deter-
mination. Entries consist of messages that generate a database entry in the
determination but which are not significant enough to result in the run being
interrupted pending confirmation by the user.
Each message consists of Date, Time and Message text.
The message window is deleted when a sequence is started with
[START]. In this way all messages of the last single determination or deter-
mination series can be viewed.
The label of the tab changes to red as soon as a new message has been
entered. The label of the Messages tab changes to black again after having
shown the messages and the tab is changed anew.
3.8.5 Live display - Properties
Subwindow: Workplace ▶ Live display
With the menu item View, Properties, Properties Live display # or the
context-sensitive menu item Properties Live display # in the subwindow
itself the dialog window Properties Live display # is opened.
Command type
Select the command type for which the properties in the live display are to
be defined. The curve properties defined for each command type are saved
per live display window and per client.
Selection DET | MET | SET | KFT | KFC / BRC | STAT |
MEAS | MEAS T/Flow | MEAS TC Cond | MEAS
Opt | DOS | TET
Default value DET
Measured value display
on | off (Default value: off)
If this option is enabled the measured values required are displayed in the
subwindow Live display.