Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1156)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1140 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Identifi-
cation Description
.FIN Command status; 1 = Command has ended at least
once, 0, invalid (variable not available) = Command has
never ended
5.6.7.10.2 RLS DEV - Properties
Dialog window Method ▶ RLS DEV ▶ Properties... ▶ RLS DEV - 'Command name''
Command name
Name of the command.
Input 25 characters
Device
Device name
Selection of a device from those available in the device table. The only devi-
ces which shall be offered are those with which the command can run.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start of
the method.
Device type
Display or selection of the device type. If a device is selected under Device
name, then this Device type field can no longer be edited, and the device
type belonging to the selected device is displayed instead.
If the option not defined is selected as Device name, any device types or
device groups which are able to execute the command can be selected,
independently of the devices in the device table.
Selection 'Sample changer types' | 814 USB Sample Pro-
cessor
Default value 814 USB Sample Processor
5.6.8 Result commands
5.6.8.1 Result commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Result
Commands for the calculation, storage and output of results.
The following four result commands can be selected: