Metrohm tiamo 2.2 (ProcessLab) User Manual
Page 1563
Advertising
■■■■■■■■■■■■■■■■■■■■■■
8 Manual Control
tiamo 2.2 (ProcessLab)
■■■■■■■■
1547
Port
Display of the internal description of the port.
Type
Display of the port type.
Timeout
Time in seconds or minutes within which the action must have run through
completely. If this is not done after the maximum waiting time has expired,
the status of the stepping motor will be set to ERROR.
Range
0 ... 999999
Default value
10
Selection
s | min
Default value
s
Status
Display of the current status.
Selection
ACTIVE | INACTIVE | ERROR
[Set]
Resets the stepping motor to factory settings.
Graphical display
Besides the stepping motor the assigned inputs and outputs ar also dis-
played.
Advertising