Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1555)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual Control
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1539
Analog input
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Mapping
Display of the mapped value range.
Current value
Display of the adjacent value.
Graphical display
8.4.6.5 Analog outputs
Program part: Manual Control
8.4.6.5.1 Analog outputs - Overview
Program part: Manual Control
If in the device tree the branch Analog outputs is selected, then all outputs
can be commonly controlled on the tabs Set value and Set default in the
subwindow functions/parameters.
In the subwindow for the graphical display the adjacent value for all con-
nected analog outputs is shown in their physical order.
Set value
Value
Enter the value in % of the mapped range.