Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1548)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1532 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Digital input
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Status
Display of the current status.
Selection ACTIVE | INACTIVE | ERROR
Graphical display
Overview of the states of a digital input:
ACTIVE INACTIVE ERROR
Display flashes.
8.4.6.3 Digital outputs
Program part: Manual Control
8.4.6.3.1 Digital ouptuts - Overview
Program part: Manual Control
If in the device tree the branch Digital outputs is selected, then all outputs
can be commonly controlled on the tabs Switch on/off and Set default
in the subwindow functions/parameters. In the subwindow for the graphical
display the status of all connected digital outputs is shown in their physical
order.
Switch on/off
[Start]
Sets all digital outputs to ACTIVE.
[Stop]
Sets all digital outputs to INACTIVE.