Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1194)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1178 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Device type
Display or selection of the device type. If a device is selected under Device
name, then this Device type field can no longer be edited, and the device
type belonging to the selected device is displayed instead
If the option not defined is selected as Device name, any device types or
device groups which are able to execute the command can be selected,
independently of the devices in the device table.
Selection AND | Mettler | Ohaus | Precisa | Sartorius | Shi-
madzu
Default value Precisa
Weighing command
Instructions
Character string that is sent via the RS-232 interface.
AND
Input
S
Mettler
Input
S
Ohaus
Input
1S
Precisa
Input
P1
Sartorius
Input
\1bP
Shimadzu
Input
ID08
Max. waiting time
Maximum time during which the balance data is waited for.
Value
Range 0.0 ... 9999.9
Default value 1
Device
Selection min | s
Default value min