Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1348)

6.8 Subwindow Common variables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1332 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
6.8 Subwindow Common variables
6.8.1 Configuration - Common variables
Subwindow: Configuration ▶ Common Variables
Common variables subwindow
The subwindow Common variables contains the table with the configured
common variables. It can be shown in the program part Configuration as
a part of the Configuration view or (if not present on the desktop) in a sep-
arate window with View
▶ Quick access. The subwindow can be enlarged
and reduced as required; it can also be maximized.
Using common variables
Common variables are method-embracing variables that are stored per client
and can be used in formulas under the designation 'CV.Name'. They are
either entered manually in the configuration or assigned in the method run
by a CALC command.
Note
For common variables which are newly calculated during a determination
in a CALC command and which are saved in the configuration, the current
values are available for additional calculations in the same determinations
from this instant. This is not the case for determinations running at the
same time on other workplaces; here, the values available at the start of
the determination are applied.
6.8.2 Table of common variables
6.8.2.1 Table of common variables
Subwindow: Configuration ▶ Common variables
Contents
The table of common variables shows the following information about the
common variables as standard:
Name
Name of common variable.
Type
Type of common variables (Number, Text or Date/Time).
Value
Value of common variables.