Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1560)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1544 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Not visible in cases of stepping motors where Type = Rotary drive.
Range -214783647 ... 214783647 °
Default value 0 °
Timeout
Time in seconds or minutes within which the action must have run through
completely. If this is not done after the maximum waiting time has expired,
the status of the stepping motor will be set to ERROR.
Range 0 ... 999999
Default value 10
Selection s | min
Default value s
Status
Display of the current status.
Selection ACTIVE | INACTIVE | ERROR
[Start]
Sets the stepping motor to ACTIVE.
[Stop]
Sets the stepping motor to INACTIVE.
End position
On this tab the position of the stepping motor can be modified manually, it
can be moved to the maximum end position.
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Status
Display of the current status.
Selection ACTIVE | INACTIVE | ERROR
[>]
Sets the stepping motor to ACTIVE and moves in positive direction as long
as the button remains pressed or until an end position is reached.