Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 270)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
254 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Remove selected field.
Modifies the sequence of the exported fields by moving the selected field
up.
Modifies the sequence of the exported fields by moving the selected field
down.
4.4.4.2.3 Export template - Options for CSV format
Dialog window: Database ▶ Tools ▶ Templates ▶ Export templates... ▶ Export tem-
plates ▶ [Properties] ▶ Export template ▶ [Options] ▶ Options for CSV format
With [Options] in the Properties window for export templates the dialog
window Options for CSV format opens in which the separators can be
defined.
Field separator
Selection of the field separator.
Selection ; | , | Tab
Default value ;
Record separator
Selection of the data set separator (CR = Carriage return, LF = Line feed).
Selection CR/LF | CR | LF
Default value CR/LF
Header
on | off (Default value: on)
If this check box is activated, the column headers are exported at the begin-
ning of the export file.
4.4.4.2.4 Export template - Options for measurement point list
Dialog window: Database ▶ Tools ▶ Templates ▶ Export templates... ▶ Export tem-
plates ▶ [Properties] ▶ Export template ▶ [Options] ▶ Options for measuring point
list
With [Options] in the Properties window for export templates the dialog
window Options for measurement point list opens in which the sepa-
rators can be defined.