Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1195)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1179
5.6.10 Miscellaneous commands
5.6.10.1 Miscellaneous commands - Overview
Menu item: Method ▶ Paste ▶ New command...
These commands can be used independently of the connected devices.
The following five commands can be selected:
￭ REQUEST
Requesting sample data.
￭ CALL
Calling tracks (subprograms).
￭ LOOP
Multiple execution of a command sequence.
￭ WAIT
Interrupts the method run.
￭ SEQUENCE
Combines several commands to one command.
5.6.10.2 REQUEST
5.6.10.2.1 REQUEST - Overview
Dialog window: Method ▶ REQUEST ▶ Properties... ▶ REQUEST - 'Command name'
Command for requesting sample data during the method run. The data
can either be entered manually or sent by a peripheral device (balance, bar-
code reader).
Appearance
The command has the following appearance:
Parameters
The parameters for the command REQUEST are configured in the following
dialog window:
￭ REQUEST
Command variables
The following command variables are generated in the method run by the
command REQUEST and can be used in formulas under the designation
'Command name.Variable designation':