Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1478)

7.16 RS-232 device ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1462 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the validity period has expired then one
of the following actions will be triggered automatically at Start test.
Selection Record message | Display message | Stop deter-
mination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can choose whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period has expired will be automatically saved with the deter-
mination.
Stop determination
The running determination will be automatically terminated. The follow-
ing message must be confirmed with [OK].
7.16 RS-232 device
7.16.1 RS-232 device - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device
type' - 'Device name'
The parameters for a generic RS-232 device are set on the following tabs:
￭ General
General device information such as device name, device type, serial num-
ber, etc.
￭ RS-232
Selects and configures the serial interface the device is connected to.
￭ GLP
Information on GLP tests and GLP monitoring.
7.16.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.
Device name
Designation of the device (can be freely defined by user).