Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1553)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual Control
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1537
[Start]
Sets the digital output to ACTIVE.
[Stop]
Sets the digital output to INACTIVE.
Set default
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Status
Display of the current status.
Selection ACTIVE | INACTIVE | ERROR
[Set]
Resets all digital outputs to the default value in the configuration.
Graphical display
Overview of the states and the different port types of a digital output
Port type ACTIVE INACTIVE ERROR
not defined
Gen. output
Alarm signal
Display flashes.
Pump
Pump on Pump off Display flashes.