Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1556)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1540 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Range 0.0 ... 100.0 % Mapping
Default value 0.0 % Mapping
[Set]
Sets all analog outputs to the mapping value indicated.
Set default
[Set]
Resets all analog outputs to the default value in the configuration.
Graphical display
Example:
8.4.6.5.2 Analog output
Program part: Manual Control
If in the device tree a single analog output is selected, then the output can
be controlled on the tabs Set value and Set default in the subwindow for
functions/parameters.
In the subwindow for the graphical display the adjacent value for the analog
output status is displayed.
Set value
Port description
Display of the port description.