Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 234)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
218 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Select a single module
Single modules are selected with a click of the left mouse button. This auto-
matically shows the corresponding properties of the module below the
toolbar.
Select several modules
Several modules are selected by drawing a frame around the required mod-
ules with the left mouse button.
Moving, reducing, enlarging modules
When this cursor symbol appears then the selected modules can be moved
about on the report template with the left mouse button pressed down.
When one of these cursor symbols appears then the selected modules can
be reduced and enlarged respectively on the report template with the left
mouse button pressed down.
Cutting, copying, pasting, deleting modules
Cut the selected modules and copy them to the clipboard.
Copy the selected modules to the clipboard.
Paste modules from the clipboard.
Delete the selected module.
Edit module properties
Open the properties window for the selected module. Alternatively the
properties can also be edited directly below the toolbar.
4.4.1.4.2.7 Report template - Zoom
Program window: Database ▶ Report template
With this list box on the toolbar the required zoom step for showing the
report template can be selected in steps of 25% from 25% to 400%.