Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1248)

6.2 Administration ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1232 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Start password
Enter a new start password. Password options are not used for the start
password.
Input 50 characters
Confirm password
Confirms the start password.
Input 50 characters
6.2.2 Security settings
6.2.2.1 Security settings
Dialog window: Configuration ▶ Tools ▶ Security settings
Overview
In the dialog window Security settings the parameters for log-in, pass-
word protection, Audit Trail and electronic signatures can be configured.
These are primarily used to ensure that work is carried out according to the
requirements of FDA Guideline 21 CFR 11.
Note
The version tiamo light cannot be configured to be in conformance with
FDA guidelines. With the exception of the parameter User name
required on the tab Login/Password protection all the options are
inactive (see Chapter 6.2.2.2, page 1233).
With client/server systems the security settings are globally valid for all con-
nected clients.
Security settings can be exported and imported. This means that these set-
tings can be exchanged between different client/server systems.
The security settings can be put out as PDF file using the menu item
File
▶ Print (PDF) ▶ Security settings.
Tabs
The security settings are configured on the following tabs:
￭ Login/Password protection
Settings for login and password protection.
￭ Audit Trail/Changes
Enable/Disable the Audit Trail and comments when methods, determi-
nations or sample data are modified.
￭ Signatures
Options for electronic signatures.