Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 946)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
930 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Measuring interval
Time interval for entering a measuring point in the measuring point list.
Titrando, 855, 867
Range
0.1 ... 999999.0 s (Increment: 0.1)
Default value 2.0 s
Titrino
Range
0.08 ... 16200 s (Increment: 0.08)
Default value 2.0 s
Stop meas. value
Stops when the preset measured value has been reached since the start of
the measurement.
Titrando, 855, 867
Range
-200.0 ... 200.0 µA
Selection off
Default value off
off
No stop.
Temperature
Temperature
Measuring temperature which can be entered manually. If a temperature
sensor is connected and the Temperature measurement is set on the
General/Hardware tab under Sensor to automatic or continuous, then
the temperature will be measured continuously.
Titrando, 855, 867
Range
-20.0 ... 150 °C
Default value 25.0 °C
Titrino
Range
-170.0 ... 500 °C
Default value 25.0 °C
5.6.4.6.4 MEAS Upol - Evaluations
Tab: Method ▶ MEAS Upol ▶ Properties... ▶ Evaluations
Command name
Name of the command.
Input 25 characters