Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 338)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
322 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
4.5.2.6.5.1 Result view - Results overview
Tab: Database ▶ Determinations ▶ Reprocess... ▶ Reprocessing ▶ Result
view ▶ Result overview
In the subwindow Result view of the dialog window Reprocessing the
results calculated during the CALC commands and the variables used for
are displayed and updated with each recalculation.
Per CALC command the following elements are shown:
Title
Name of the calculation command.
Result
Result name, result value with defined number of decimal places, units.
Statistical evaluations
Results of the statistical evaluation (mean value, absolute and relative stand-
ard deviations, number of measured values used for the statistics and
statistics set counter).
If several determinations are selected for reprocessing then the navigation
buttons can be used to switch between showing the results of the individual
determinations:
Jump to first determination.
Jump to previous determination.
Jump to next determination.
Jump to last determination.
Note
If a result value is monitored and lies inside the limits defined in the
CALC command then the text will be shown in green, if it lies outside
the limits the value will be shown in red.