Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 364)

4.7 Subwindow Results ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
348 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
￭ "Command name"
Show the results for a single calculation command. A tab with the cor-
responding command name is provided for each calculation command.
4.7.2 Results - Results overview
Tab: Database ▶ Result ▶ Results overview
On the tab Results overview the results for all calculation commands and
(if existent and desired) the corresponding statistical evaluations are dis-
played. The display of the statistical evaluations can be selected in the dialog
window Properties result window
Command "Command name"
For each CALC command a results overview is shown according to the fol-
lowing pattern:
"Command name"
Name of the CALC command.
Note
Only the last results having been calculated will be shown. For example,
if there are several commands that generate a result with the same name,
then the corresponding result data will be shown only for that command
that was the last to calculate the result. Nothing will be shown for the
other commands.
"Result"
Shows the result name and result value with the defined number of decimal
places and units.
Note
If a result value is monitored and lies within the limit value defined in the
CALC command then the text will be shown in green, if it lies outside the
limits it will be shown in red text color.
Mean value:
Shows the mean value for statistically evaluated results.
s(abs):
Shows the absolute standard deviation for statistically evaluated results.