Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 254)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
238 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Selection of the fill color.
4.4.1.4.3.12 Report template - Curve field
Program window: Database ▶ Report template
Curve fields are used for showing determination curves in the report.
Insert
In order to insert a curve in a report template the corresponding symbol must
be selected on the Module bar and then placed on the report template by
creating a field with the left mouse button.
Properties
Note
The properties are saved individually for each curve field. This means that
it is possible, e.g., to show several different curves for the same measuring
command beside one another in several curve fields.
X pos.
x-position within the permitted section.
Range 0.0000 ... (max. page width) mm
Y pos.
y-position within the permitted section.
Range 0.0000 ... (max. page height) mm
Width
Width of curve field.
Range 0.0000 ... (max. page width) mm
Height
Height of curve field.
Range 0.0000 ... (max. page height) mm
Command type
Shows the command type for which a curve is to be produced.