Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1551)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual Control
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1535
For Type = Stirrer:
￭ 0: Duration of the switch-on pulse fixed at 500 ms.
￭ >0: For 100% stirrer output (Parameter 1 = 100), pulse duration in 10
ms
Example:
Parameter 1 = 100, Parameter 2 = 30: Pulse duration switched-on
300 ms, switched off 0 ms
Parameter 1 = 75, Parameter 2 = 30: Pulse duration switched-on 225
ms, switched off 75 ms
Range -214783647 ... 214783647
Default value 0
Status
Display of the current status.
Selection ACTIVE | INACTIVE | ERROR
[Start]
Sets the digital output to ACTIVE.
[Stop]
Sets the digital output to INACTIVE.
Timer control
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Parameter 1
The meaning of Parameter 1 depends on the Type of the digital output that
has been set.
When Type = Stirrer: stirrer output in %, pulse duration dependent on
Parameter 2.
Range -214783647 ... 214783647
Default value 100
Parameter 2
The meaning of Parameter 2 depends on the Type of the digital output that
has been set.