Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1603)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 9 How to proceed?
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1587
9.5 Configuration data
9.5.1 Configuration data in general
The configuration data in tiamo is saved in the Configuration data-
base. Under configuration data is to be understood all settings for devices,
titrants/solutions, sensors, common variables and rack data applying to all
methods; configuration data also includes Methods, Security settings
(see Chapter 6.2.2.1, page 1232), User administration (see Chapter
6.2.1.1, page 1223), Program administration (see Chapter 6.2.3.1, page
1242), templates and Audit Trail (see Chapter 6.4, page 1264).
For local server systems (tiamo light, tiamo full) the configuration data-
base is located in the program folder of the computer on which the program
has been installed. In Client/Server systems (tiamo multi) the configuration
database is stored centrally on the server and saves and contains all the
configuration data of all computers (clients) that are connected to this server.
9.5.2 Export configuration data
How to proceed?
1 Select program part Configuration.
2 Click on the menu item File ▶ Export....
The dialog window Export configuration data opens.
3 Select desired configuration data.
4 Click on [OK].
The dialog window Export configuration data is closed and the
dialog window Save opened.
5 Select or enter name and directory for the export file. If an existing
export file is selected it will be overwritten.
6 Click on [Save].
The export of the configuration data is started.
The selected configuration data is then saved in a file with the exten-
sion .mcfg.