Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1164)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1148 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
[Save as template]
Open the dialog window Save result template in order to save the result
parameters as template for the creation of new results (see Chapter
5.6.8.2.6.2, page 1152).
5.6.8.2.5.2 Result - Monitoring
Tab: Method ▶ CALC ▶ Properties... ▶ [New] ▶ [Continue] ▶ Result - Overview
The parameters for monitoring the result are defined on this tab.
Result monitoring
Result monitoring
on | off (Default value: off)
The question of whether the result is within the defined limit values is moni-
tored while calculating the result during the determination if this option is
enabled.
Lower limit
Lower limit for the result.
Input 10 digits
Upper limit
Upper limit for the result.
Input 10 digits
Message
Message
The message defined here can be put out to different targets if the upper
limit is exceeded or if the lower limit is not reached. The text editor for
entering or changing the message is opened with or by double-clicking
into the text field (see Chapter 2.5.2, page 84). The formula editor can also
be called up inside the text field (see Chapter 2.4, page 25).
Input Text (unlimited)
Display message
on | off (Default value: on)
If this option is enabled, all active tracks are stopped and the message
defined in the text box will be displayed in the event that the limits are
exceeded. You can select whether you want to continue the stopped tracks
with [Continue] or - if defined - to execute the Action listed below.