Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 477)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 461
Window = Measured value pH
Range
-20.0 ... 20.0 pH
Default value 20.0 pH
Window = Volume
Range
0.00000 ... 9999.99 mL
Default value 9999.99 mL
Window = Time
Range
0 ... 999999 s
Default value 999999 s
Gran evaluation
Note
This evaluation method is possible only with Titrando and 855.
Gran evaluation
on | off (Default value: off)
If this option is enabled, then titration curves will be evaluated in accordance
with the Gran Plot procedure(see Chapter 5.6.3.10.4, page 878).
Procedure
Selection of the Gran procedure.
Selection Normalized | Standard
Default value Normalized
Initial volume
Volume which must be present in the measuring vessel before the command
is started.
Range 0.01 ... 9999.99 mL
Default value 50.0 mL
Lower limit pH
Value for the lower limit of the Gran evaluation range.
Range -20.000 ... 20.000
Default value -20.000
Upper limit pH
Value for the upper limit of the Gran evaluation range.