Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 58)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
42 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Identifica-
tion Description Commands
.MR.MRC Correlation coefficient for mean
dosing rate for the whole range STAT, DOS
.MR.MRS Standard deviation for mean dosing
rate for the whole range in
mL/min STAT, DOS
.MR.MRT Mean dosing rate for the whole
range in mL/min. STAT, DOS
.MTE Temperature measurement with
sensor; 1 = on, 0 = off) DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Ref, Spec), CAL
MEAS, STDADD,
DOS
.NMP Number of measuring points in the
measuring point list DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without Ref,
Spec), CAL
MEAS, DOS
.PK{x}.ABS Absorbance of the peak x (1…9) in
mAU MEAS Spec
.PK{x}.TRN Transmission of the peak x (1…9) in
% MEAS Spec
.PK{x}.CNT Intensity of the peak x (1…9) in
counts MEAS Spec
.PK{x}.CNR Intensity of the peak x (1…9) in the
reference spectrum in counts MEAS Spec
.PK{x}.CND Intensity of the peak x (1…9) in the
dark spectrum in counts MEAS Spec
.PK{x}.WVL Wavelength of the peak x (1…9) in
nm MEAS Spec
.PK{x}.SAT Detector with peak x (1…9) satura-
ted: 1 = saturated;0 = not satu-
rated MEAS Spec