Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 403)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 387
program; the number of currently opened methods is displayed in the left
upper corner of the method symbol.
Note
A maximum of 9 methods can be opened but only two can be displayed
at the same time (see Chapter 5.2.3.1, page 388).
5.2.3 Select method
Program part: Method
The number of the currently opened methods is displayed in the left upper
corner of the method symbol. If 2 or more methods are opened, then these
two methods, which can displayed either (see Chapter 5.2.3.2, page 388)
or (see Chapter 5.2.3.3, page 388) in the main window, can be selected
with the aid of the method symbol.
No method is opened. No method is displayed in the main
window.
One method is opened and is displayed in the main win-
dow.
Two methods are opened. Normally only one method is
displayed in the main window but the option exists of dis-
playing two methods at once, either (see Chapter
5.2.3.2, page 388) or (see Chapter 5.2.3.3, page 388).
A menu with the currently opened methods is
displayed by clicking with either the left or right
mouse button on the method symbol. The
methods displayed in the main window are
marked with a checkmark. Clicking on the
desired method displays it in the place of the
previously selected one.