Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 958)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
942 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
off
No stop.
Measurement without drift control
If the option Measurement without drift control has been selected, then
the following parameters will be displayed:
Measuring time
Maximum period of time for measurement.
Titrando, 855, 867
Range
0 ... 999999 s
Default value 600 s
Titrino
Range
0 ... 9999 s
Default value 600 s
Measuring interval
Time interval for entering a measuring point in the measuring point list.
Titrando, 855, 867
Range
0.1 ... 999999.0 s (Increment: 0.1)
Default value 2.0 s
Titrino
Range
0.08 ... 16200 s (Increment: 0.08)
Default value 2.0 s
Stop meas. value
Stops when the preset measured value has been reached since the start of
the measurement.
Titrando, 855, 867
Range
-20.0 ... 150.0 °C
Selection off
Default value off
off
No stop.
Temperature
Temperature
Measuring temperature which can be entered manually. If a temperature
sensor is connected and the Temperature measurement is set on the