Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 188)

3.8 Subwindow Live display ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
172 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
On these tabs the live display elements (curve, measured value, message)
defined in the Properties are displayed for the currently active command.
The tabs have to be switched manually, i.e. there is no automatic switching
when calling another track. This makes it possible to display two simultane-
ously active tracks next to another in two live windows.
At the start of the determination the content of the track tabs is deleted.
Afterwards the messages, curves and measured value displays defined by
the active commands will appear in the track tabs. The tab titles of the active
tracks will be displayed in red. Additionally the command type and command
name of the active command are displayed in the window title of the sub-
window Live display.
If all tracks or single tracks are stopped with [HOLD] or a SEND command,
then in these tracks Track halted... is displayed.
After stopping the track Track finished is displayed in each track except
for the main track. After finishing the determination and depending on the
determination run the following is displayed in the main track:
Selection Run: regular without remarks | Run: regular
with remarks | Run: Abort | Run: Stop by error
Run: regular without remarks
The determination was finished automatically after it was processed reg-
ularly and without any remarks.
Run: regular with remarks
The determination was finished automatically after it was processed reg-
ularly but with remarks (see Chapter 4.6.6, page 346).
Run: Abort
The determination or the conditioning was stopped manually with
[Stop], by stop criterions or with a SEND command.
Run: Stop by error
The determination or the conditioning has been canceled automatically
because of an error or has not even been started because of an error at
the Start test.
Context menu
Cancel Cancel the active command of the track.
Properties - Live dis-
play
Set properties of the live display (see Chapter 3.8.5, page 173).