Metrohm tiamo 2.2 (ProcessLab) User Manual
Page 1565
■■■■■■■■■■■■■■■■■■■■■■
8 Manual Control
tiamo 2.2 (ProcessLab)
■■■■■■■■
1549
Range
1 ... 12
Default value
1
Shift direction
Select the direction in which the valve moves to the target port.
Selection
ascending | descending | automatic | not over
Default value
ascending
ascending
The valve moves towards the target port in ascending direction.
descending
The valve moves towards the target port in descending direction.
automatic
The valve determines the shortest path to the target port on its own.
not over
The valve moves towards the target port in such a way that the port
specified in the parameter Not over will not be traversed.
Not over
Select that port which is not to be traversed when the port is changed. This
parameter can only be edited for Shift direction = not over.
Range
1 ... 12
Default value
1
[Start]
Set the definite values.
Move to current port position + 1.
Move to current port position + 1.