Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1155)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1139
Gas flow
Selection Switch on | Switch off
Default value Switch on
Switch on
Switches on the gas flow.
Switch off
Switches off the gas flow.
5.6.7.10 RLS DEV
5.6.7.10.1 RLS DEV - Overview
Dialog window: Method ▶ RLS DEV ▶ Properties... ▶ RLS DEV - 'Device name'
Command to release a device for using it in other parallel running meth-
ods. It removes the reservation made by the current method.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command RLS DEV are configured in the following
dialog window:
￭ RLS DEV - Properties
Command variables
The following command variables are generated in the method run by the
command RLS DEV and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
never been started