Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 169)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 153
Note
If a value is entered or imported into this field, then in addition the time
of the data entry and the data source are stored manually, while the
'Name of the scale', the 'Name of the barcode reader' or the
'Name of the import file') are stored automatically at the same time,
placed in the determination and identified in the Information sub-
window as Data entry and Data source.
Note
If a negative value is entered in this field (e. g. during data import from a
scale in the event of reweighing), then this will be also be calculated as a
negative in the formula editor.
Input Number with a maximum of 10 digits
Default value 1.0
Unit
Sample size unit (initial weight). There are no restrictions on the text to be
entered in this field.
Input 16 characters
Selection g | mg | µg | mL | µL | pieces
Default value g
Note
If data from the current sample data line is modified for the ongoing
determination, then this is regarded as a live modification. If the option
Comment on modification of sample data (live) is enabled in the
security settings, then a reason and a comment on the modification must
be entered before saving (see Chapter 6.2.2.4, page 1238).
Navigation
Display of the currently selected line in the working sample table with the
following functions:
Jump to the first line in the working sample table.