Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1307)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1291
Range 0 ... 999 Days
Default value 999 Days
Expiry date
Expiry date of the solution. The date can be selected by pressing in the
dialog window Select date. When a date has been entered the Working
life will be automatically adapted.
Selection Date selection
Message
The message options can only be edited if monitoring is switched on.
Message by E-mail
on | off (Default value: off)
The message is additionally sent to the E-mail address defined under [E-
mail] if this option is activated. The message is sent in text format.
[E-mail]
[E-Mail] opens the Send E-mail window (see Chapter 2.6.1, page 86).
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted additionally to the
message defined above
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the working life has expired then one
of the following actions will be triggered automatically at Start test:
Selection Record message | Display message | Stop deter-
mination
Default value Display message
Record message
The message that the working life has expired will be automatically saved
with the determination.
Display message
A message is displayed and you can choose whether you want to con-
tinue the run or cancel it. If the run is continued, the message that the
working life has expired is automatically saved in the determination.
Stop determination
The running determination will be automatically canceled. The following
message must be confirmed with [OK].