Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 190)

3.8 Subwindow Live display ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
174 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Measured value 1…3
Select the measured values for the measured value display. The measured
quantities and the default value depend on the Command type selected.
DET
Selection
Measured value | Time | Temperature | Volume
| Calculated 1...3 | External 1...3 | off
MET
Selection
Measured value | Time | Temperature | Volume
| Calculated 1...3 | External 1...3 | off
SET
Selection
Measured value | Time | Temperature | Volume
| dV/dt | Calculated 1...3 | External 1...3 | off
KFT
Selection
Measured value | Time | Temperature | Volume
| dV/dt | Calculated 1...3 | External 1...3 | off
KFC / BRC
Selection
Measured value | Quantity | Time | drift |
Charge | Ugen | Igen | Calculated 1...3 | External
1...3 | off
STAT
Selection
Measured value | Time | Temperature | Volume
| dV/dt | Calculated 1...3 | External 1...3 | off
MEAS
Selection
Measured value | Time | Temperature | dMW/
dt | Calculated 1...3 | External 1...3 | off
MEAS T/Flow
Selection
Measured value | Time | Flow | Calculated 1...3
| External 1...3 | off
MEAS TC Cond
Selection
Measured value | Time | dMW/dt | Calculated
1...3 | External 1...3 | off
MEAS Opt
Selection
Measured value | Time | Intensity | Transmis-
sion | Saturated pixels | off