Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1515)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Devices
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1499
Parameter 2
The meaning of Parameter 2 depends on the Type set.
[Edit]
Opens the dialog Properties Digital output in order to edit the selected
port.
[Port description]
Opens a menu in order to import or export port descriptions.
The menu [Port description] contains the following menu items:
Import Import of a text file (TXT, CSV) containing the port description. Each line is inter-
preted as port description, spaces will be ignored.
Export Export a text file containing the port descriptions of all digital inputs.
7.20.5.1 Properties Digital output
Dialog window Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device
type' - 'Device name' ▶ Digital output ▶ [Edit] ▶ Properties Digital output
In the dialog window Properties Digital output the properties of the
individual digital outputs are set.
Port
Display of the internal designation for a digital output port of the type
DigOut_x_y_z, whereas x stands for the controller; y for the digital output
terminal and z for the output on this terminal.
Port description
Freely selectable designation for a digital output port. This designation is
used in the program to actuate the port.
Input 50 characters
Default value DigOut_x_y_z
The following characters must not be part of the port
description: \ , ', ., {, }, [, ].
Type
Selection of the port type.
Depending on the type the function and the graphical representation of the
port varies.
Selection not defined | Pump | Stirrer | Valve | Gen. out-
put | Alarm signal
Default value not defined