4 send, 1 send - overview, Send – Metrohm tiamo 2.2 (ProcessLab) User Manual
Page 1180
5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1164
￭￭￭￭￭￭￭￭
tiamo 2.2 (ProcessLab)
Note
Input lines that are of no interest or for which no defined condition can
be predicted should also be masked with an asterisk *.
Max. waiting time
on | off (Default value: off)
If this option is activated, then a maximum waiting time can be entered for
the input signal.
Range
0.0 ... 9999.9
Default value
10.0
Selection
min | s
Default value
min
Note
If the option Max. waiting time is not activated, it is being waited end-
lessly for the input signal.
5.6.9.4
SEND
5.6.9.4.1
SEND - Overview
Dialog window: Method
▶ SEND ▶ Properties... ▶ SEND - 'Command name'
Command for Sending event messages to commands, tracks or to
tiamo.
Appearance
The command has the following appearance:
Parameters
The parameters for the command SEND are configured in the following
dialog window:
￭