Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 64)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
48 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Variable name Description Data
type
SEN Indication whether the end of the sample table has been reached; 1 = yes, 0 =
no Number
SIN Indication whether the determination has been started as a single determination or
within a series; 1 = single determination, 0 = series determination Number
SLI Sample table actual line (number) Number
STA Indication whether the statistics is activated; 1 = yes, 0 = no Number
STC Start counter Number
USN Short name of the logged-in user Text
ORG Method run: 1 = original determination, 0 = reprocessing Number
STO Indication whether the determination has been stopped (manual stop, stop via SEND
command, emergency stop) or terminated normally ; 1 = stopped, 0 = termina-
ted normally Number
2.4.3.8 Common variables
Dialog window: Formula Editor ▶ Variables
Common variables are global variables, which are adopted from the corre-
sponding table of the program part Configuration, where the common
variables can be defined, at the start of the determination and assigned to
the determination. The Variables field of the Formula editor lists all Com-
mon Variables which are available for the current method, sorted accord-
ing to name.
Syntax
'CV.Variable name.Variable name'
Examples: 'CV.TestDate', 'CV.TestTime.VAL', 'CV.Average-
Temp.UNI'
You can select the common variables directly in the formula editor under
Variables/Common Variables in order to avoid syntax errors.
Available Common Variables
Variable name Description Data
type
VAL Value of the Common Variable (facultative, i.e. 'CV.Test.VAL' = 'CV.Test') Text,
number
or date/
time
UNI Unit of the Common Variable Text