Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 351)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 335
Selection Regular without messages | Regular with
remarks | Stop | Stop by error
Regular without messages
The determination was finished automatically after the method was pro-
cessed normally and without any remarks.
Regular with remarks
The determination was finished automatically after the method was pro-
cessed normally but with remarks.
Stop
The determination was stopped manually with [Stop], by a stop criterion
or with a SEND command.
Stop by error
Due to an error, the determination was canceled automatically.
User (short name):
Short name of the user.
Note
Which user is entered depends on the option Edit workplaces in
'BUSY' status in the security settings (see Chapter 6.2.2.2, page 1233).
Active User who started the determination.
Inactive User logged in when finishing determination.
User (full name):
Full name of the user.
Note
Which user is entered depends on the option Edit workplaces in
'BUSY' status in the security settings (see Chapter 6.2.2.2, page 1233).
Active User who started the determination.
Inactive User logged in when finishing determination.
Remarks:
Shows the Remarks about the determination entered in the run window
of the workplace.