H3C Technologies H3C Intelligent Management Center - Manual (Page 100)

82
Figure 79 Entering the access policy configuration page
To enter the proprietary attribute assignment policy configuration page, click the User tab and select User
Access Policy > Access Device Management > Proprietary Attribute from the navigation tree, as shown
in
Figure 80 .
For more configuration information, see " Configuring proprietary attribute assignment policies ."
Figure 80 Entering the proprietary attribute configuration page
Configuring a service
A service is a set of access policies applied in specific access conditions. You must add services before
adding access users. When you add an access user, apply for a service for the user.
To enter the access service page, click the User tab and select User Access Policy > Access Service from
the navigation tree, as shown in
Figure 81 . For more configuration information, see " Configuring access
services ."